Burn the Hell's Highway

KAWASAKI NINJA ZX-10R ABS 2011 HIGHLIGHTS

Price : $14,799.00
Bodystyle : Super Sports Bike
Warranty : 12 months
Manufacturer Country : Japan
Model Year : 2011
Displacement (cc) : 998
Engine Type : Horizontal In-line

VEHICLE REVIEW

World’s Ultimate Sporting Motorcycle, It’s hard to imagine a more advanced or more capable sportbike than the completely new and totally redesigned Kawasaki Ninja® ZX™-10R. After all, it packs the very latest in sport bike technology, much of it right off the MotoGP circuit, including the most advanced traction-control system in production bike history. But the ZX-10R has an even smarter sibling – the 2011 Ninja ZX-10R ABS. At first glance, anti-lock braking might seem a touch out of place on a purebred sportbike. This system was designed from the start to provide maximum on-track performance. And when you consider the many safety- and control-oriented benefits provided by the amazing electronic and hardware technology available today, it begins to make a lot of sense. Think of it: You’re charging into a hairpin during a track day. It’s late in the afternoon, you’re tired, and your front tire is shagged from a day of hard-core knee-dragging. But instead of tucking as you squeeze the front brake lever, your front tire chirps briefly and the KIBS system intervenes until traction returns – allowing you to arc gracefully into the corner, a little wiser and a lot more intact physically that you might have been riding a non-ABS motorcycle. On the street, anti-lock’s benefits are even easier to realize. Kawasaki calls its all-new anti-lock system KIBS – or Kawasaki Intelligent anti-lock Brake System. The use of “intelligent” is apropos, too, considering just how smart the new KIBS is. It all starts with the smallest and lightest ABS unit ever built for a motorcycle, one Bosch designed specifically with sport bikes in mind. It’s nearly 50 percent smaller than current motorcycle ABS units, and 800 grams lighter, adding only about 7 pounds of weight compared to the non-ABS machine, a pound of which is accounted for by the larger battery. KIBS is a multi-sensing system, one that collects and monitors a wide range of information taken from wheel sensors (the same ones collecting data on the standard ZX-10R for its S-KTRC traction control system) and the bike’s ECU, including wheel speed, caliper pressure, engine rpm, throttle position, clutch actuation and gear position. The KIBS’s ECU actually communicates with the bike’s engine ECU and crunches the numbers, and when it notes a potential lock-up situation, it tells the Bosch unit to release caliper pressure, allowing the wheel to once again regain traction.
Aside from this system’s ultra-fast response time, it offers a number of additional sport-riding and race track benefits, including rear-end lift suppression during hard braking, minimal kickback during ABS intervention, and increased rear brake control during downshifts. The high-precision pressure control enables the system to avoid reduced brake performance (sometimes seen on less advanced systems), maintain proper lever feel and help ensure the ABS pulses are minimized. The rest of the 2011 Ninja ZX-10R ABS is equally advanced. Not only are we talking about a complete redesign of the Big Ninja’s engine, frame, suspension, bodywork, instrumentation and wheels, but a highly advanced and customizable electronic system that allows riders of all skill levels to harness and experience the new ZX-10R ABS’s amazing blend of power and razor-edge handling. The system – called Sport-Kawasaki Traction Control, or S-KTRC – represents a whole new dimension in sport motorcycling, and the ZX-10R ABS is the only production sport bike that can take you there. Motorcyclists have forever been challenged by traction-related issues, whether on dirt, street or track. Riders that can keep a rear tire from spinning excessively or sliding unpredictably are both faster and safer, a tough combination to beat on the racetrack. And when talking about the absolute leading edge of open-class sport bike technology, where production street bikes are actually more capable than full-on race bikes from just a couple years ago, more consistent traction and enhanced confidence is a major plus. The MotoGP-derived S-KTRC system works by crunching numbers from a variety of parameters and sensors – wheel speed and slip, engine rpm, throttle position, acceleration, etc. There’s more data gathering and analysis going on here than on any other Kawasaki in history, and it’s all in the name of helping racers inch closer to the elusive “edge” of maximum traction than ever before. The S-KTRC system relies on complex software buried in the new ZX-10R’s Electronic Control Unit (ECU), the only additional hardware is the lightweight speed sensors located on each wheel. Unlike the KTRC system on Kawasaki’s Concours™ 14 ABS sport tourer, which primarily minimizes wheel slip on slick or broken surfaces as a safety feature, the S-KTRC system is designed to maximize performance by using complex analysis to predict when traction conditions are about to become unfavorable. By quickly, but subtly reducing power just before the amount of slippage exceeds the optimal traction zone, the system – which processes every data point 200 times per second – maintains the optimum level of tire grip to maximize forward motion. The result is significantly better lap times and enhanced rider confidence –exactly what one needs when piloting a machine of this caliber.
The S-KTRC system offers three different modes of operation, which riders can select according to surface conditions, rider preference and skill level: Level 1 for max-grip track use, Level 2 for intermediate use, and Level 3 for slippery conditions. An LCD graph in the newly designed instrument cluster displays how much electronic intervention is occurring in real time and a thumb switch on the left handlebar pod allows simple, on-the-go mode changes. The system also incorporates an advanced Power Mode system that allows riders to choose the amount of power – and the character of delivery – available from the engine. Besides the standard full-power mode are Medium and Low settings. In Medium mode, performance varies according to throttle position and engine rpm; at anything less than 50 percent throttle opening, performance is essentially the same as in Low mode; at more than 50 percent, riders can access additional engine performance. All three S-KTRC settings are available in each of the three Power Mode settings. And the motorcycle so capably managed by all of this trick electronic wizardry? It was completely redesigned from 2010 to ’11.
It all starts with the ZX-10R ABS’s all-new inline-four, easily the most advanced engine to ever emerge from a Kawasaki factory. Like last year’s potent ZX-10R engine, the new powerplant is a 16-valve, DOHC, liquid-cooled inline-four displacing 998cc via 76 x 55mm bore and stroke dimensions. But that’s where the similarity stops, as the new mill boasts a handful of engineering changes designed to optimize power, power delivery, center of gravity and actual engine placement within the chassis. A primary goal of Kawasaki engineers was linear power delivery and engine manageability throughout all elements of a corner: the entry, getting back to neutral throttle at mid-corner, and heady, controllable acceleration at the exit. Peak torque was moved to a higher rpm range, which helped to smooth the power peaks and valleys that can make it difficult for racers and track day riders to open the throttle with confidence. Larger intake valves (31mm vs. 30mm), wider – and polished – intake ports, and completely revised exhaust porting all allow better breathing, more controllable power delivery and less engine braking, just the thing to smooth those racetrack corner entries and exits. Higher-lift camshafts built from lighter-yet-stronger chromoly steel (instead of cast iron on the previous model) and featuring revised overlap further contribute to optimized engine braking and more controllable power delivery. Newly designed lightweight pistons feature shorter skirts and mount to lighter and stronger connecting rods, each of which spin a revised crankshaft made of a harder material and featuring stronger pins and journal fillets. Compression moves to a full 13.0:1. There’s more, including a totally revamped crankshaft/transmission shaft layout that contributes to a higher center of mass – and improved handling via better mass centralization – by locating the crankshaft approximately 10 degrees higher relative to the output shaft. There’s even a secondary engine balancer assembly this year, which allows a number of vibration-damping parts to be simplified, contributing to weight savings. A smaller and dramatically lighter battery helps drop even more weight, as does a lighter ECU and fuel pump. A race-style cassette transmission allows simple trackside ratio changes and offers a host of improvements for 2011. These include closer spacing for 4th, 5th and 6th gears and the fine tuning of the primary and final reduction ratios for less squat/lift during acceleration and deceleration, which allows more precise suspension tuning in back. An adjustable back-torque limiting clutch assembly is fitted, helps reduce driveline shock during downshifts and offers an even higher level of corner-entry calmness. Cramming all that fuel and air into this amazing new engine is a ram air-assisted fuel injection system featuring larger throttle bodies (47 vs. 43mm) and sub-throttle valves, a larger capacity airbox (9 vs. 8 liters), secondary injectors that improve top-end power characteristics, and a redesigned ram-air intake that’s positioned closer to the front of the bike for more efficient airbox filling and increased power. The final piece of the ZX-10R ABS’s power-production formula is a race-spec exhaust system featuring a titanium header assembly, hydroformed collectors, a large-volume pre-chamber containing two catalyzers and a highly compact silencer. Due to the header’s race-spec design, riders and racers looking for more closed-course performance need only replace the muffler assembly

With the engine producing a massive quantity of usable and controllable power, engineers looked to the chassis to help refine handling and overall road/track competency even further. An all-new aluminum twin-spar frame was designed, an all-cast assemblage of just seven pieces that features optimized flex characteristics for ideal rider feedback, cornering performance and lighter weight than last year’s cage. Fewer pieces mean fewer welds, which contributes to a cleaner, more aesthetically pleasing look. Like the frame, the new alloy swingarm is an all-cast assembly, with idealized rigidity matching that of the frame itself. Chassis geometry was juggled to offer the best possible stability and handling quickness. Rake, at 25 degrees, is a half-degree steeper than on the 2010 machine, while trail has been reduced from 110 to 107mm. This slightly more radical front end geometry, and the quicker, lighter handling it allows, was made possible largely from the new engine’s more controllable power, engine placement and the CG differences it generated, and the frame and swingarm’s newfound flex characteristics. Highly advanced suspension at both ends helped as well. Up front is a 43mm open-class version of the Big Piston Fork (BPF) found on last year’s comparo-dominating Ninja ZX-6R. Featuring a piston design nearly twice the size of a conventional cartridge fork, the BPF offers smoother action, less stiction, lighter overall weight and enhanced damping performance on the compression and rebound circuits. This added compliance results in more control and feedback for the rider – just what you need when carving through a rippled sweeper at your local track or negotiating a decreasing-radius corner on your favorite backroad. There’s big suspension news in back, too. Replacing the vertical Uni-Trak® system of the 2010 ZX-10R is a Horizontal Back-link suspension design that positions the shock and linkage above the swingarm. Benefits include better mass centralization, improved road holding, compliance and stability, smoother action in the mid-stroke (even with firmer settings), better overall feedback and cooler running. The design also frees space previously taken by the linkage assembly below the swingarm, space now used for the exhaust pre-chamber, which allows a shorter muffler and, again, better mass centralization. The fully adjustable shock itself features a piggyback reservoir and dual-range (low- and high-speed) compression damping. All-new gravity-cast three-spoke wheels are significantly lighter than the hoops fitted to the 2010 bike, and combine with the very latest in brake technology – Tokico radial-mount calipers grasping 310mm petal discs up front and a 220mm disc and lightweight single-piston caliper in back. The result is powerful stops with plenty of rider feedback and the added confidence of the KIBS ABS system. Finally, Kawasaki engineers wrapped all this new technology in bodywork as advanced and stylish as anything on this side of a MotoGP grid. Shapes are more curved than edged this year, and the contrasting colored and black parts create a sharp, aggressive image. Line-beam headlights enable the fairing to be made shorter, while LED turn signals are integrated into the mirror assemblies. Convenient turn-signal couplers allow easy mirror removal for track-day use, while the rear fender assembly holding the rear signal stalks and license plate frame is also easily removable for track days. High-visibility LED lamps are also used for the tail and position lights. Instrumentation is totally new as well; the unit highlighted by an LED-backlit bar-graph tachometer set above a multi-featured LCD info screen with numerous sections and data panels. A wide range of information is presented, including odometer, dual trip meters, vehicle speed, fuel consumption, Power Mode and S-KTRC level indicators, low fuel, water temperature and much more. For track use, the LCD display can be set to “race” mode which moves the gear display to the center of the screen. The new ZX-10R ABS’s ergonomics have been fine tuned for optimum comfort and control, with a slightly lower saddle, adjustable footpegs positioned slightly lower and forward relative to last year, and clip-ons with a bit less downward angle. This is a hard-core sportbike you can actually take on a weekend ride – and be reasonably comfortable doing so. And because it’s more than 10 pounds lighter than last year’s bike, the new ZX-10R ABS will be much more manageable in whatever environment you choose to ride it in.
The old saying, “power is nothing without control” is certainly apt where open-class sport bikes are concerned. But when you factor in all the engine, chassis, ergonomic and anti-lock braking control designed into the 2011 Ninja ZX-10R ABS, you begin to realize you’re looking at one very special motorcycle – one that will prove to you time and time again why it’s arguably the most advanced sportbike ever.

Standard Features

Key Features

All-new engine and chassis add up to enhanced power delivery and more control
Kawasaki Intelligent anti-lock Braking System (KIBS) monitors a wide range of data to help ensure no-lock stops
All-new Sport-Kawasaki Traction Control (S-KTRC) continuously monitors wheel speed, throttle position, engine rpm and a host of other data to help ensure the optimal amount of traction
All-new Power Mode selector allows riders to select power level and power delivery on the fly
All-new aluminum frame has ideal strength and rigidity
All-new Big Piston Fork helps maintain composure under braking
All-new horizontal back-link rear suspension helps improve road holding, and helps deliver smoother suspension action
2011 ZX™-10R ABS is significantly lighter than the 2010 model
Improved mass centralization
Slipper-type back-torque limiting clutch helps improve corner entry handling
All-new race-oriented instrumentation offers riders a wealth of information

New for 2011 Kawasaki Ninja ZX-10R ABS

Totally redesigned DOHC 16-valve inline-four engine makes more linear, controllable power than ever before
Stronger camshafts, pistons and crankshaft maintain legendary Kawasaki reliability in the face of the engine's increased horsepower potential
Ultra-advanced Kawasaki Intelligent anti-lock Braking System (KIBS) monitors a wide range of data to help ensure no-lock stops
All-new S-KTRC electronic traction control system comes directly from MotoGP and allows riders to explore the edge of traction more successfully for faster laps and maximum cornering speeds
All-new ECU electronics also include a Power Mode system, which allows riders to pick between three power modes for changing conditions
Revised transmission shaft layout raises the engine's center of mass slightly for better mass centralization
Newly designed titanium-header exhaust system has nearly identical specs to its roadracing counterpart
Revised fuel injection system features larger throttle bodies and dual injectors
All-new aluminum twin-spar frame is lighter and offers optimal flex characteristics for the best possible handling
43mm Big Piston Fork (BPF) is lighter than a conventional design and offers improved action and response
New horizontal back-link rear suspension offers better wheel control and improved mass centralization, all of which improves stability and overall handling
Shock and linkage assemblies are now positioned above the swingarm, which frees space below it for a large exhaust sub-chamber, which allows a shorter (and lighter) muffler
Lighter and stronger 3-spoke gravity-cast wheels minimize unsprung weight for exceptional handling quickness
Revised ergonomics offer a slightly roomier cockpit, a slightly lower seat and adjustable footpegs
Revised chassis geometry - steeper rake, less trail, slightly raised CG - allows even sharper handling characteristics
Significant weight reduction compared to the 2010 machine
Radical new bodywork features more rounded edges and a revised ram-air intake
Mirrors integrate trick, LED turn signals and remove easily for track-day use
Revised transmission gear ratios for better on-track performance
High visibility instrumentation includes an LED bar-graph tachometer and a full complement of LCD readouts to keep riders fully informed

New-generation Liquid-cooled DOHC 998cc Inline-four Engine

All-new design is compact, narrow and lightweight, and features a revised internal transmission shaft layout that optimizes CG and engine placement in the frame
Stronger camshafts, crankshaft and pistons increase durability and are able to withstand the new engine's increased horsepower potential
Larger intake valves (now 31mm), revised camshaft profiles and optimized port shapes help maximize power production and smooth power delivery
Cylinder bores are machined with a "dummy" head bolted in place, yielding improved bore circularity and precision, so lower-tension piston rings can be used to reduce mechanical losses
Offset cylinder bores (relative to the crankshaft) are positioned 2mm toward the exhaust side of the engine, resulting in reduced lateral piston force at the point of maximum combustion pressure and lower piston loads - which allows the use of lighter pistons
Larger-diameter intake tappets (now 29mm) suit the higher-lift camshafts
New, chromoly camshafts (previously cast iron) receive a new nitriding process and lapping treatment to help cope with heavier valve spring pressure and enhance durability
New, harder crankshaft features stronger pins and journal fillets; gear teeth durability was also increased
Single-shaft secondary balancer was added to help reduce vibration, and its use allowed several vibration-damping parts to be simplified and lightened
Connecting rods are stronger overall to suit the engine's increased power potential
New ECU is dramatically lighter than the old unit and is small enough to be tucked away in a slot in the airbox assembly
A lighter battery replaces the old unit for even more weight savings
One-piece upper crankcase and cylinder casting saves weight and offers maximum rigidity
Low friction oil pump reduces parasitic power loss
A lightweight radiator with tightly packed cores provides efficient engine cooling
A liquid-cooled aluminum oil cooler promotes high-efficiency heat dissipation
Intake and exhaust valves are titanium for reduced reciprocating weight and higher rpm capabilities

Dual-injector Digital Fuel Injection

Larger throttle bodies (47mm vs. 43mm) help produce more power and improved throttle control
Secondary fuel injectors improve top-end power output and power characteristics at high rpm; the lower injectors are always on, while upper injectors come on as needed according to degree of throttle opening and engine rpm
Oval-shaped throttle bodies - larger for 2011 - allow precise throttle control and instant response
An Idle Speed Control (ISC) valve on the throttle body unit automatically adjusts idle speed for more stable operation; also contributes to easier starts and better off-idle throttle response

Sport-Kawasaki Traction Control - S-KTRC

A highly sophisticated electronic system based on actual Kawasaki MotoGP experience that's designed to maximize forward motion by allowing riders to more easily ride at the very edge of traction
The system, anchored by an all-new Electronic Control Unit (ECU), crunches a wide range of data, including throttle position, wheel speed, engine rpm, wheel slippage, acceleration, etc. with help from a speed sensor fitted to each wheel
The quickest acceleration requires a certain amount of wheel slippage, so to optimize traction, S-KTRC actually allows a slight bit of wheelspin
Using complex analysis, the system is able to predict when traction conditions are about to become unfavorable. By acting before slippage exceeds the range for optimal traction, the system can quickly and smoothly reduce power slightly so the wheel regains traction
S-KTRC confirms conditions 200 times per second and governs ignition, which allows extremely quick reaction
Riders can choose between three operational modes, depending on skill level and conditions
A level meter on the LCD instrument panel lets the rider know when the system is operating

Kawasaki Intelligent Anti-lock Braking System (KIBS)

The most advanced anti-lock braking system ever utilized on a production motorcycle
Utilizes the smallest and lightest ABS unit available - a Bosch-built unit that's half the size of a standard unit and considerably lighter
KIBS monitors a wide range of data, including front and rear wheel speed, throttle position, gear selection, engine rpm, caliper pressure, clutch actuation and more to help prevent wheel locking
High-precision brake pressure control offers a number of sport riding benefits, including rear-end lift suppression, minimal kickback during operation and consistent lever feel
ABS unit is located close to the bike's center of mass, behind the left engine cylinder, which minimizes the effects of the added weight
System uses wheel speed sensors already fitted to the non-ABS ZX-10R (used for S-KTRC traction control system)
A radial-pump front master cylinder provides the ultimate in front brake feel and feedback
Tokico radial-mount brake calipers use dual pads and offer a superb initial bite, increased control, progressive feel and a high degree of feedback to the rider
A pair of 5.5mm thick, 310mm petal discs provides the heat dissipation needed to maintain brake feel and responsiveness during extended heavy use
A 220mm rear petal disc gripped by a single-piston caliper provides excellent feel and feedback

Ram-air Intake

A highly efficient and more forward-positioned ram air intake is designed for lower intake noise, higher intake efficiency
Redesigned and larger airbox (now 9 liters instead of 8) with a new filter element improves breathing and power
Oval-section intake funnels promote non-turbulent flow at all rpm

Titanium Exhaust System

All-new titanium-header exhaust system with hydroformed header pipes and small, lightweight muffler assembly uses a larger-volume pre-chamber that houses two catalyzers for reduced emissions and sound
Headers have nearly identical specs to their roadracing counterparts, which makes it easier for riders to increase track performance with the simple addition of a less-restrictive muffler; now there's no need to replace the lightweight and race-spec header assembly
Dual catalyzers help the 2011 ZX-10R meet strict U.S. and Euro III exhaust emissions standards

Six-speed Transmission

Race-style cassette transmission allows simple trackside gearing changes to suit individual circuits
With the revised engine shaft layout, the "cassette" is located high enough that it can be accessed without having to drain engine oil
Fine-tuned primary and final reduction ratios minimize rear end movement (squat/lift) during acceleration and deceleration. The more composed rear end action allows more freedom with suspension settings
Closer-ratio 4th, 5th and 6th gears complement the new ZX-10R's circuit performance
Overall gear ratios suit the power characteristics for ideal power delivery in all rpm ranges
An adjustable back-torque limiting clutch facilitates smooth downshifts, a main contributor to stability under heavy braking.

Chassis System

All-new aluminum-alloy frame connects the swingarm pivot with the steering head more directly, and offers optimal flex and rigidity characteristics for balanced handling on street or track
Revised chassis geometry incorporates slightly steeper rake (0.5 degree) and a bit less trail (3mm). The result is more weight on the front wheel, which allows sharper steering characteristics and crisper handling with no corresponding tradeoff in chassis stability at speed
Frame is an all-cast construction of only seven pieces, which allowed engineers much design freedom, including minimizing wall thicknesses while providing adequate strength and ideal rigidity
Fewer frame pieces mean fewer welds, which contributes to more pleasing aesthetics
More front end weight also aids aggressive, on-the-gas corner exits, as there is less tendency to wheelie
Modifying or removing the exhaust pre-chamber (for racetrack applications only) enables two chain links to be removed, which offers riders the opportunity to alter chassis geometry even further by shortening the wheelbase by 16mm
Like the frame, the alloy swingarm is an all-cast design, with just three pieces
Narrow subframe layout contributes to the compact and slim tail section

Horizontal Back-link Rear Suspension

All-new design positions the shock and linkage above the swingarm
The new design offers a host of benefits, including improved road-holding, smoother suspension action (especially in the final third of the stroke range), increased stability and feedback when cornering, and improved mass centralization
The design also frees space under the swingarm for a larger exhaust pre-chamber, which allows the use of a shorter and lighter muffler assembly
The design also positions the shock's upper link (mounted to the frame's upper cross member) further from the swingarm pivot, helping to spread out the load and contribute to enhanced overall frame rigidity and chassis balance
The fully adjustable shock features a piggyback reservoir and dual (high and low-speed) compression damping, which enables fine tuning for racing or track day use
Between the Big Piston Fork (BPF) and new Back-link suspension system, pitch control during aggressive riding is minimized, which contributes to added rider control and faster lap times
Minimal effect from exhaust heat due to the new design translates to more stable damping performance

Big Piston Fork (BPF)

The Big Piston Fork (BPF) fitted to the 2011 Ninja® ZX-10R features 43mm inner tubes and is one of the contributing factors to the new bike's enhanced composure under braking
Compared to a cartridge-type fork of the same size, the BPF features a main piston almost twice the size as the piston on the previous ZX-10R: 39.6mm vs. 20mm
Oil inside the BPF acts on a surface area almost four times the size of a conventional fork's. The larger surface area allows damping pressure to be reduced while ensuring that damping force remains the same
Reducing damping pressure allows the slide pipe to move more smoothly, which is especially noticeable at the initial part of the strok. The result is greater control as the fork compresses and very calm attitude change as vehicle weight shifts forward under braking, and thus greater chassis stability on corner entry
Because the BPF eliminates many of the internal components of a traditional cartridge fork, construction is simplified and overall fork weight is reduced
Compression and rebound damping adjustments are located at the top of each fork tube, while preload is now at the bottom

Race-spec Steering Damper o An adjustable twin-tube Öhlins steering damper is standard. The second tube acts like a reservoir, allowing the internals to help ensure stable damping and excellent feedback even under racing conditions

Lightweight Three-spoke Cast Aluminum Wheels

New gravity-cast alloy wheels feature a three-spoke design that's lighter than previous hoops by 330 grams (0.73 pound) up front and nearly 500 grams (1.1 pounds) in back
Lighter wheels reduce unsprung weight, which allows the suspension system to work more efficiently

Ergonomics

Fine-tuned rider accommodations feature a lower seat (by 17mm), adjustable footpegs moved slightly lower (by 5mm) and forward (by 2mm), and clip-ons with a bit less downward angle
Lower seat makes it easier to reach the ground
Newly shaped fuel tank offers an even better ergonomic fit with the rider's forearms and inner thighs when riding
Adjustable foot pegs can be lowered an additional 15mm when street riding or touring

A total body redesign results in a lighter, more compact and even sexier shape, with more curved - instead of "edged" - surfaces
High-quality fit and finish, and superb attention to detail, are evident front to back
Larger ducting aids engine heat dissipation
Line-beam headlights enable the fairing to be shorter, which furthers the compact, aggressive styling
LED three-bulb position lamp at the top of the new ram air duct is highly visible to drivers and pedestrians
Fairing-mounted mirrors feature integrated, LED-type turn signals
Turn signals are electrically connected via couplers, which allows easy mirror removal for track day riding
Compact tail section includes an elegant, nine-bulb taillight
Taillight and turn-signal stalks are mounted on a rear fender assembly that's easily removable for track day riding

Advanced Electronic Instrumentation

All-new instruments feature a high-visibility bar-graph LED tachometer positioned above a multi-window LCD info panel that offers riders a massive quantity of information

The tachometer also functions as a shift indicator:LEDs flash when the pre-set rpm is reached, and riders can set shift rpm according to preference

Additional functions include odometer, dual trip meters, average fuel consumption, instant fuel consumption, Power Mode (x3), S-KTRC (x4), S-KTRC level indicator, low fuel indicator, Economical Riding indicator (shows most favorable fuel consumption), water temperature and a host of indicator lamps

OVERVIEW SPECIFICATIONS

Engine

Bore (in) : 2.99
Bore (mm) : 76
Carburetion Brand : Keihin
Compression Ratio : 13.01
Cooling : Liquid
Cylinders : 4
Displacement (cc) : 998
Displacement (ci) : 60.9
Emissions Standards : Meets Euro 3 Emissions
Engine Configuration : Horizontal In-line
Engine Immobilizer : Not Available
Engine Type : 4-Stroke
Fuel Injector : Yes
Fuel Injector Size (mm) : 47
Fuel System Type : Fuel Injected
Ram Air Induction : Yes
Starter : Electric
Stroke (in) : 2.17
Stroke (mm) : 55
Valve Configuration : DOHC
Valves : 16
Valves Per Cylinder : 4

Performance

Torque (Ft Lbs) : 83.2
Torque (Nm) : 112.8
Torque RPM : 8700

Transmission

Heel Toe Shifter : Not Available
Number Of Speeds : 6
Primary Drive (Rear Wheel) : Chain
Reverse : No
Transmission Type : Manual

Steering & Suspension

Air Adjustable : No
Front Adjustable Fork Pre-Load : Yes
Front Adjustable Rebound Damping : Yes
Front Central Suspension Strut : No
Front Fork Diameter (in) : 1.7
Front Fork Diameter (mm) : 43
Front Suspension Type : Inverted Fork
Front Travel (in) : 4.7
Front Travel (mm) : 119.4
Number Rear Shock Absorbers : 1
Rear Adjustable Rebound Damping : Yes
Rear Adjustable Shock / Spring Pre-Load : Yes
Rear Suspension Type : Twin Sided Swing Arm
Rear Swingarm Material : Aluminum
Rear Travel (in) : 4.9
Rear Travel (mm) : 124.5
Steering Damper : Yes

Wheels

Front Wheel Diameter : 17
Rear Wheel Diameter : 17
Tube / Tubeless : Tubeless
Wheels Composition : Aluminum

Tyres

Front Tire (Full Spec) : 120/70 ZR17
Front Tire Aspect Ratio : 70
Front Tire Speed Rating : Z
Front Tire Width : 120
Rear Tire (Full Spec) : 190/55 ZR17
Rear Tire Aspect Ratio : 55
Rear Tire Speed Rating : Z
Rear Tire Width : 190

Brakes

Anti-Lock Brakes : Standard
Brake Brand Name : Tokico
Front Brake Diameter (in) : 12.2
Front Brake Diameter (mm) : 310
Front Brake Type : Dual Hydraulic Disc
Front Caliper Pistons : 4
Rear Brake Diameter (in) : 8.7
Rear Brake Diameter (mm) : 220
Rear Brake Type : Hydraulic Disc
Rear Caliper Pistons : 1

Seats

Adjustable : No
Detachable Passenger Seat : Standard
Grab Rail or Strap : Standard
Heated Seat : Not Available
Number Of Seats : 2
Seat Backrest : Not Available
Seat Height (in) : 32
Seat Height (mm) : 812.8
Seat Location : Driver and Passenger
Seat Material : Vinyl
Seat Rail : Not Available
Seat Specifications : Standard
Seat Tail Cover : Standard
Seat Type : Two-Piece

Bodywork

Adjustable : No
Belt Guard : No
Body Material : Plastic
Brush Guard : No
Chain Guard : Yes
Construction : Standard
Drive Shaft Cover : No
Drive Shaft Guard : No
Exterior Covers : Standard
Exterior Guards : Standard
Floor Boards : Not Available
Foot Peg Location : Driver and Passenger
Foot Peg Material : Aluminum
Fork Guards : No
Frame : Aluminum
Front Fender : Standard
Front Fender Material : Plastic
Front Fender Rail : Not Available
Front Fender Trim : Not Available
Hand Grip Material : Rubber
Hand Grips : Standard
Hand Guards : No
Heel Guards : No
License Plate : Standard
Light Guard : No
Lower Fairing : Standard
Rear Fender : Standard
Rear Fender Material : Plastic
Rear Fender Rail : Not Available
Rear Fender Trim : Not Available
Rearview Mirrors Folding : Yes
Saddle Bag Guard : No
Sidecar : Not Available
Skid Plate : Not Available
Spoiler : Standard
Stand : Standard
Stand Type : Kick
Tank Cover : No
Turn Signal Visor : Not Available
Upper Fairing : Standard

Fuel Capacity

Fuel Capacity (gal) : 4.5
Fuel Capacity (l) : 17

Colours

Lime Green / Ebony

Ebony / Flat Ebony

DIMENSIONS

Adjustable Throttle : Not Available
Capacities : Standard
Cassette Player : Not Available
CB Radio : Not Available
CD Player : Not Available
Comment : Standard
Cruise Control : Not Available
Cupholder : Not Available
Dimensions : Standard
First Aid Kit : Not Available
Handlebar Lock : Standard
Handlebar Pads : Not Available
Headset : Not Available
Heated Hand Grips : Not Available
Height (in) : 43.9
Height (mm) : 1115.1
Intercom : Not Available
Introduction Year : 2011
Keyless Ignition : Not Available
Length (in) : 81.7
Length (mm) : 2075.2
Major Revision Year : 2011
Manufacturer Country : Japan
Manufacturer Type : Super Sports Bike
Map Holder : Not Available
MIC Model Segment : ON-HWY Sport Bike Over 750cc
Power Outlet : Not Available
Previous Model Year Accessories : Yes
Radio : Not Available
Rake (degrees) : 25.5
Revision Status : New
Service Reminder : Not Available
Speakers : Not Available
Trail (in) : 4.3
Trail (mm) : 110
Weight : Standard
Wheelbase (in) : 56.1
Wheelbase (mm) : 1424.9
Width (in) : 28.2
Width (mm) : 716.3